Plate35symbol.html

Plate35, symbols.

36A, 49A, 14B, 20B, 23B, 24B, 56B, 32C,

11D,21D, 69D, 44E, 107E, 140E, 50F, 51F, 19H, 20H, 57H, 58H,

59H, 60H, 61H, 62H, 63H, 30CT, 9CU, 53CU, 83CU, 90CU.

A symbol in italics is not illustrated unless referred to another plate.

Symbol Description
36A Foot notes: *
a36A1 Centring Pin Auxiliary Spring (2), for display type casting
b36A1 Centring Pin Auxiliary Spring (2), Large Composition Attachment
a36A2A* Abutment, lower, for display casting
a36A3 Abutment, upper, for display casting
b36A3 Abutment, upper, Large Composition Attachment
36A4 Abutment Stud (2), for display type casting
36A5 Abutment Stud Nut (2), for display type casting
36A6 Abutment Stud Washer (2), for display type casting
Xb36A Centring Pin Auxiliary Spring, for display type casting, group; consists of a36A1 (2), a36A2A, a36A3, 36A5 (2), 36A6 (2)
Xc36A Centring Pin Auxiliary Spring, Large Composition Attachment, group; consists of b36A1 (2), a36A2A, b36A3, 36A5 (2), 36A6 (2)
*a36A2A consists of a36A2, 36A4 (2)

TOP

Symbol Description
49A Foot notes: Ý , § , * , || , ß
TYPE AND RULE CASTER DISPLAY ATTACHMENT
a49AA* Matrix Holder, for American Display Matrices
No. 5550 Blank Matrix
a49A1 Positioning Spring
b49A2 Positioning Spring Screw (2), 1/8"x5/16"
a49A3AÝ Slide, front
a49A4 Slide Retaining Pin
a49A5 Slide, rear
a49A6 Slide Operating Lever, hand
a49A7 Slide Operating Lever Fulcrum
a49A8Aß Slide Operating Lever, front
a49A9 Slide Operating Lever Pin
a49A10A§ Slide Operating Lever, rear
a49A11 Slide Operating Lever Pin
a49A12A|| Slide Operating Lever, intermediate
a49A13 Slide Operating Lever Pin (2)
a49A14 Slide Operating Lever Spring, front
a49A15 Slide Operating Lever Spring, rear (2)
a49A16 Slide Operating Lever Spring Post (3)
a49A17 Cone Hole Slide, adjustable
a49A18 Cone Hole Slide Screw (2), 3/16"x9/32"
a49A19 Cover Plate
a49A20 Cover Plate Screw (4), 3/32"x11/64", countersunk
49A22 Positioning Spring Adjusting Screw
49A23 Positioning Spring Adjusting Screw Lock Screw, 1/8"x7/16", grub
Xa49A Matrix Holder, for American Display Matrices, group; consists of a49AA and Blank Matrix NO. 5550
*a49AA consists of a49A, a49A1, b49A2 (2), a49A3A, a49A5 6 and 7, a49A8A, a49A10A, a49A12A, a49A14, a49A15 (2), a49A16 (3), a49A17, a49A18 (2), a49A19, a49A20 (4), 49A22 and 23
Ýa49A3A consits of a49A3 and 4
ßa49A8A consists of a49A8 and 9
§ a49A10A consists of a49A10 and 11
||a49A12A consits of a49A12 , a49A13 (2)

TOP

Symbol Description
14B Foot notes:
TYPE AND RULE CASTER DISPLAY ATTACHMENT
Normal Wedge Lockimg Pin
a14B12 Lifting Handle

TOP

Symbol Description
20B Foot notes:
SHORT LEAD AND RULE ATTACHMENT
Type Carrier
b20B11 Lever, for Type Clamp

TOP

Symbol Description
23B Foot notes:
TYPE AND RULE CASTER ATTACHMENT
c23BB Type Carrier Shoe, long
b23B3 Cam, front
b23B4B Cam, rear, movable
23B12 Cam Fulcrum Pin
a23B13 Cam Fulcrum Pin Knob
23B14 Cam Fulcrum Pin Knob Pin

TOP

Symbol Description
24B Foot notes:
TYPE AND RULE CASTER DISPLAY ATTACHMENT SHORT LEAD AND RULE ATTACHMENT
Type Carrier Shoe, short
a24B2 Plate, Trip for Type Clamp (Type 14 to 36 Point and Didot)
d24B2 Plate, Trip for Type Clamp (Short Rules, 11/2, 2 and 3 Point and Didot)

TOP

Symbol Description
56B Foot notes:
TYPE AND RULE CASTER DISPLAY ATTACHMENT
56B1 Mould Coupling Hook,14 to 18 Point and Didot Display Mould

TOP

Symbol Description
32C Foot notes:
TYPE AND RULE CASTER DISPLAY ATTACHMENT QUAD AND SPACE MOULD ATTACHMENT
32C1 Mould Blade Abutment Slide Abutment Screw Packing Piece, 17 Point
b32C1 Mould Blade Abutment Slide Abutment Screw Packing Piece, 17 Didot

TOP

Symbol Description
11D Foot notes:
TYPE AND RULE CASTER DISPLAY ATTACHMENT QUAD AND SPACE MOULD ATTACHMENT SHORT LEAD AND RULE ATTACHMENT
a11D1 Justification Wedge, rear, Point, Display

TOP

Symbol Description
21D Foot notes:
DISPLAY ATTACHMENT QUAD AND SPACE MOULD ATTACHMENT SHORT LEAD AND RULE ATTACHMENT
Normal Wedge Point
a21D2 Handle
Xb21D Normal Wedge, Point, group; consists of b21D1, a21D2

TOP

Symbol Description
69D Foot notes: None
DISPLAY ATTACHMENT QUAD AND SPACE MOULD ATTACHMENT SHORT LEAD AND RULE ATTACHMENT
a69D1 Justification and Normal Wedge Gauge

TOP

Symbol Description
44E Foot notes:
TYPE AND RULE CASTER ATTACHMENT SHORT LEAD AND RULE ATTACHMENT QUAD AND SPACE MOULD ATTACHMENT
Mould Blade Cam Lever
d44E9 Compound Lever Lock Screw Collar

TOP

Symbol Description
107E Foot notes:
TYPE AND RULE CASTER DISPLAY ATTACHMENT
Gear Cover, rear
107E5 Screw (2), 1/4"x3/4", Cover, rear, bottom, Part 1, to Speed Bracket Cap Screw

TOP

Symbol Description
140E Foot notes: *
DISPLAY ATTACHMENT QUAD AND SPACE MOULD ATTACHMENT SHORT LEAD AND RULE ATTACHMENT
a140E1E* Centring Pin Lever Gag Block
a140E2 Pin
140E3 Spring
140E4 Stud
140E5 Stud Nut
Xa140E Centring Pin Lever Gag Block group; consists of a140E1E, 140E3, 4 and 5
*a140E1E consists of a140E1 and 2

TOP

Symbol Description
50F Foot notes:
TYPE AND RULE CASTER DISPLAY ATTACHMENT
Xf50F Type Channel Block,adjustable, 24 to 36 Point and Didot Display Mould, group

TOP

Symbol Description
51F Foot notes:
TYPE AND RULE CASTER DISPLAY ATTACHMENT
h51FF Type Channel Block, fixed, 14 to 18 Point and Didot Display Mould, Quad Mould
k51FF Type Channel Block, fixed, 24 to 36 Point and Didot Display Mould
a51F6 Screw, rear, 3/16"x11/16"

TOP

Symbol Description
19H Foot notes:
TYPE AND RULE CASTER DISPLAY ATTACHMENT
Piston Operating Rod
a19H5 Crosshead Stud
a19H6 Crosshead Stud Nut
a19H7 Crosshead Stud Nut Lock Nut

TOP

Symbol Description
20H Foot notes:
TYPE AND RULE CASTER DISPLAY ATTACHMENT
Piston Spring
c20H1 Rod
b20H7 Rod Sleeve

TOP

Symbol Description
57H Foot notes:
TYPE AND RULE CASTER DISPLAY ATTACHMENT
57H1 Latch
57H2 Plate
57H3 Plate Screw (2), 5/32"x5/16", countersunk
X57H Latch group; consists of 57H1 and 2, 57H3 (2)

TOP

Symbol Description
58H Foot notes:
TYPE AND RULE CASTER DISPLAY ATTACHMENT
58H1 Latch Abutment
58H2 Plate
58H3 Plate Screw (2), 5/32"x5/16", countersunk
X58H Latch Abutment group; consists of 58H1 and 2, 58H3 (2)

TOP

Symbol Description
59H Foot notes:
TYPE AND RULE CASTER DISPLAY ATTACHMENT
59H1 Latch Abutment Spring

TOP

Symbol Description
60H Foot notes:
TYPE AND RULE CASTER DISPLAY ATTACHMENT
60H1 Latch Pin (Not supplied separately, order X60H)
60H2 Split Pin, 3/32"x5/8"
60H3 Plate (Not supplied separately, order X60H)
60H4 Plate Spring Pin
60H5 Plate Stop Pin
X60H Latch Pin group; consists of 60H1 to 5 inclusive

TOP

Symbol Description
61H Foot notes:
TYPE AND RULE CASTER DISPLAY ATTACHMENT
61H1 Latch Spring

TOP

Symbol Description
62H Foot notes: *
TYPE AND RULE CASTER DISPLAY ATTACHMENT
62H1H* Latch Stand
a62H2 Shaft
62H4 Shaft Nut
62H5 Shaft Nut Lock Nut
62H6 Shaft Spring
62H7 Spring Pin, for Latch Abutment Spring
X62H Latch Stand group; consists of 62H1H, a62H2, 62H4, 5 and 6
*62H1H consists of 62H1, 62H7

TOP

Symbol Description
63H Foot notes: *
TYPE AND RULE CASTER DISPLAY ATTACHMENT
a63H1 Pump Body Spring Rod Stop Plate (4)
c63H3 Thumb Screw
63H5 * Spring, for obsolete Stud b63H3
Xb63H Pimp Body Spring Rod Stop Plate group; consists of a63H1 (4), c63H3
*Attachments supplied on and after June 1945 and prior to August 1948 were rquipped with this part

TOP

Symbol Description
30CT Foot notes:
TYPE AND RULE CASTER DISPLAY ATTACHMENT
30CT1 Centring Pin Auxiliary Spring Gag

TOP

Symbol Description
9CU Foot notes:
Display Attachment
Object- To provide for casting on the Compostion Caster the larger sizes of type (from 14 to 36 point inclusive) as sorts, also leads and rules
a9CU Display Attachment (Home Customers), specify point or didot, complete; consists of a9CU(A), a9CU(B)
b9CU Display Attachment (Foreign Customers, specify country), specify point or didot, complete; consists of a9CU(A), b9CU(B)
a9CU(A) Display Attachment (excepting Speed Regulating), specify point or didot; consists of Xb36A, Xa48A, a14B12, c23BB assd. a24B2, 56B1, 32C1, a11D1, Xb21D (or b32C1, b11D1, Xd21D), a69D1, d44E9, Xa140E, Xf50F, h51FF, Xk51F, a14H2, Xfw17H, a19H5, 6 and 7, b20H, c20H1, c20H5, b20H7, 20H11, a20H12, 20H13, Xk23H, X57H, X58H, 59H1, X60h, 61H1, X62H, Xb63H, 6CT7, Xa29CT, 30CT1
a9CU (B) Speed Regulating Attachment (Home Customers); consists of Xb3E, Xb5E, a6E, d19E assd., a97E1, Xa98E, X99E, Xa100E, Xa101E, X102E, X103E, 104E1, Xa105E, Xa106E, Xa107E, X108E, Xa109E, X110E, 111E1, 112E1, 117E1, 118E1, X119E, Xa120E, X121E, Xd122E, Xa123E, X124E, X125E, X126E, X129E, 130E1, 130E2 (6), X131E, Xa132E, X133E, X217E, Xa37F
b9CU (B) Speed Regulating Attachment (Foreign Customers specify country); consists of a9CU(B), but with Xe122E in place of Xd122E

TOP

Symbol Description
53CU Foot notes:
Short Lead and Rule Attachment
(11/2, 2 and 3 point and didot)
Object-To deliver material cast in the Short Rule Mould
For Composition Casters equipped with Display Attachment and Type and Rule Casters
53CU Short Lead and Rule Attachment (Specify point or didot), consists of b20B11, d24B2, a14H4
53CU1 Short Lead and Rule Attachment (Specify point or didoit), consists of a14<B12, b20B11, d24B2, 32C1, a11D1, Xb21D (or b32C1, b11D1, Xd21D), a69D1, d44E9, Xa140E, h51FF, a14H4

TOP

Symbol Description
83CU Foot notes:
Large Composition Attachment
Object-To provide for casting 14,16, 18 and 24 point large composition
For Composition Casters numbered 22700 and over
83CU1 Large Composition Attachment, consists of Xc36A, a24B2, d44E9, Xc19F, Xv30F, a14H2, Xhw17H, a19H5, 6 and 7, c20H1, b20H7, a20H12, X57H, X58H, 59H1, X60H, 61H1, X62H, Xb63H, 30CT1
For Composition Casters numbered 22700 and over equipped with Galley Trip (Sorts) Atachment
83CU2 Large Composition Attachment, consists of 83CU1, but with Xw30F in place of Xv30F
For Composition Casters numbered 22700 and over equipped with Galley Trip (Sorts) and Leading Attachment
83CU3 Large Composition Attachment; consists of 83CU1, but with Xaw30F in place of Xv30F
For Composition Casters numbered 22700 and over equipped with Galley Trip (Sorts) and Quadding and Centring Attachment
83CU4 Large Composition Attachment; consists of 83CU1, but with Xbw30F in place of Xv30F
For Composition Casters numbered 22700 and over equipped with Leading Attachment
83CU5 Large Composition Attachment; consists of 83CU1, but with Xcw30F in place of Xv30F
For Composition Casters numbered 22700 and over equipped with Quadding and Centring Attachment
83CU6 Large Composition Attachment; consists of 83CU1, but with Xdw30F, Xew30F in place of Xv30F
Note. This Attachment requires that the Casting Machine be fitted with some form of Speed Regulating Mechanism.
The Matrix-case and Normal Wedge are not included as part of the Attachment, order separately.
For Composition Casters numberd prior to 22700, order also the Duplex Piston Sporing Attachment 75CU1, without c20H1, b20H7 and a20H12 (included in 83CU1)

TOP

Symbol Description
90CU Foot notes:
Quad and Space Mould Attachment
Object-To provide necessary parts for operating Quad and Space Mould on Composition Casters not equipped with Display Attachment (Part A)
For Composition Casters, point
90CU1 Quad and Space Mould Attachment; consists of a14B12, c23BB assd., 32C1, a11D1, Xb21D, a69D1, d44E9, Xa140E
For Composition Casters, didot
90CU2 Quad and Space Mould Attachment; consists of a14B12, c23BB assd. , b32C1, b11D1, Xd21D, a69D1, d44E9, Xa140E
Note. This Attachment requires that the Compostion Caster be fitted with some form of Speed Regulating when the larger spaces are required, i.e., 1em of 12 point or its equivalent

TOP